Choosing a Custom Laser Cutting Machine

custom laser cutting machine

If you’re in the market for a new, there are a few things you need to know first. The laser cutting machine you choose should be powerful enough to handle the materials you plan to use. There are also some materials you should avoid cutting with a laser. Faux leather, PVC vinyl, and Plether are all bad ideas, as they can catch on fire or cause toxic fumes. Other materials to avoid cutting with a laser cutter include ABS, HDPE, and polystyrene foam, which can also cause fire. Unless you’re going to use a laser cutter for industrial applications, you should be able to find one that will meet your needs and keep you safe.

Regardless of what type of material you’re cutting, the laser beam needs to be focused on the work zone with high quality lenses. The quality of the lens determines how wide the focused spot is, so a 0.0125-inch (0.32-millimeter) width is the minimum. A kerf width of less than 0.010mm can be achieved depending on the material thickness. Each cut starts with piercing, which is a step where the laser beam enters the material to be cut. Stainless steel, for example, requires 5-15 seconds for piercing to occur.

The cutting head fires a continuous laser into the material, which is shaped like a spiral. The laser cutter driver reads the design’s vector paths, which tell the laser which path to follow in order to cut the material. High-speed cutting requires fast movements of the laser, while low-speed cutting can cause the material to burn at the edges. When choosing a, you should always keep these things in mind.

The best choice for wood is a CO2 laser cutting machine. These machines allow you to preserve the wood surrounding the project. They also have great precision. If you want a dark engraving, you should choose a machine that can achieve this. It is possible to test the machine first on a sample piece of wood. A good place to start is Thunder Laser. They can guide you to the machine that’s right for your needs.

When choosing a custom laser cutting machine, you should consider the cost of the machine, and how much you are willing to spend to buy it. You should also consider the operating system, as this will determine how much you’ll spend. A good supplier will have a system in place to optimize it for maximum speed. Moreover, you should consider the speed of the machine when mass-producing products. If you plan to make a lot of money with it, speed and accuracy should be important.

A flying optics system is the most popular choice for laser cutting machines. This system consists of mirrors that move in the X and Y axes. Unlike fixed-beam lasers, it does not have a limitation on the weight of the sheets, which makes it ideal for cutting thicker materials. However, it has a disadvantage: it has a lot of variability in the size of the beam. A laser beam is never perfectly parallel. It diverges slightly as it exits the laser.