Hand Held Laser Welding Machine

hand held laser welding machine

If you’re looking for a hand held https://www.angelo-home.com/product/modern-high-gloss-white-kitchen-cabinet-design/ machine, then you’ve come to the right place. We’ll take a look at the LightWELD https://www.angelo-home.com/product-category/furniture-panel/high-gloss-acrylic-mdf-panel/ machine, which can weld common steels, stainless steel, and brass. If you’re considering buying one, read on to learn about some of the pros and cons of this product. SoHo Cutting is a leading manufacturer of hand held laser welding equipment, and we hope this article will help you decide which one is right for you.

LightWELD is a hand-held laser welding machine

IPG’s LightWELD is a hand-held, wireless laser welding machine with 74 preprogrammed process parameters for easy and efficient welding. With this machine, welding processes become more predictable and productive, reducing scrap and post-processing costs. It is also flexible compared to other welding methods, allowing you to weld thick and thin metals without requiring any pre-cleaning. This allows even the most inexperienced welders to reliably weld materials with dissimilar thickness and high electrical conductivity.

It can weld common steels

The filler metal used to weld stainless steel to common steels is 309 (stainless). This metal has sufficient chromium and nickel content to overcome the dilution problem inherent in mild steel. This filler metal deposits a weld metal with excellent corrosion and hot-cracking resistance. Its final weld bead contains 60 percent filler metal and 20 percent small base metals. Because mild steel contains no chromium or nickel, it cannot be used for welding stainless steel to steel.

It can weld stainless steel

There are many benefits of using a https://www.hmlasercutter.com/. Not only does it eliminate the need for welding consumables, but it also reduces the material costs associated with the process. The machine’s multiple safety features help keep both the operator and the workpiece safe. A body temperature sensor allows the light to turn on and off only when the workpiece is touching the switch. Also, the welding tip is locked after the workpiece has been removed.

It can weld brass

It can weld brass, too. But the strength of the flame depends on the zinc content of the metal. Brass can melt when weld metals with oxyacetylene, and the strength of the flame is determined by the amount of zinc. This metal is highly conductive to heat. So, you have to be very careful when welding brass. The strength of the flame must be adjusted to ensure that the brass will not be overheated.

It is easier to transport

Handheld laser welding is becoming more popular with many manufacturers, due to its low running costs, low set-up time, and ease of use. These machines also have advantages of low cost, high quality welds, and minimal post-processing requirements. However, it is important to note that they must be operated by a person in the room with the laser. This breaks the ‘Put it in a box’ principle.